With a sound knowledge on how to fix a sewing machine by yourself you can save a handsome amount on the payment of mechanics whom you call in frequently for self-repairable disturbance of your machine.
Therefore, today, this article presents you with some of the most common issues of a sewing machine and the most effective solutions to them. Don’t forget to make an explicit exploration for own sake!
How to fix a sewing machine: 6 types of problems
The issues brought by us can be solved in a number of ways. But, we have given you the solution that you can bring with the least effort. Here we go!
Broken or bent needle
This is one of the most annoying and dangerous issues of any sewing machine. A needle that has a bent tip can damage the quality of your fabric to a great extent. So, what to do?
The answer is very simple- always use a needle that is made of high-quality material. The needle must match the requirements of your project.
For example, if you are dealing with leather project, the needle must be tough enough to be flexible with leather. Besides, after the accomplishment of every project, you must replace the old needle with a new one.
If your needle breaks down at the time of sewing, stop sewing at once. Get the needle out, insert a new means suitable one, thread the new needle, and switch on sewing again.
But, if the needle keeps breaking down frequently even after you have followed our suggestions meticulously, it means the machine has got some mechanical issues. In such a case, calling in an expert is the best recommendation.
When you notice that the fabric is not feeding properly, the first thing that you have to do is to ensure whether your machine contains a drop-feed settings or not. If it does, then make sure that the settings is activated properly.
Then, sort it out whether the embroidery plate has kept the feed dog covered or not. In addition, be sure that the presser foot is in downward position and set to accurate pressure as per your fabric quality. Moreover, while jumping into seaming ensure that your material is properly laid under the needle before you lower the presser foot.
Thread keeps breaking
Just like the first problem- bent needle, this is another annoying problem that is often responsible for worse sewing quality. This can make the entire sewing look ugly. However, to avoid the issue, follow these:
At first, examine the type of the thread that you have been using so far. Remember that delicate threads, which are essentially designed for hand-sewing, are never flexible with sewing machine. So, if you have been using thread of that kind, stop using immediately any more.
Then, make sure that the weight of the upper and lower thread is equal. Because if any of the threads is heavier, it will keep breaking the other one. In addition, you can rethread the upper thread with the assurance that the presser foot is in upper position.
Even if, you keep facing the same issue, keep the tension setting of the upper thread lower.
Sometimes, users complain about their machines skipping of stitches. Actually, the problem has a number of probable reasons instead of any fixed one.
To solve it, you should firstly, examine if you are using the perfect type of needle that goes with your project. Try to find out whether it is installed properly or not or whether it is bent or damaged or not.
A common reason for this problem often remains out of the sewers sight, which is the upper thread is unable to reach bobbin. As a result, thread is left unlocked and results in skipped stitch.
In this situation, you should rethread the machine including bobbin and upper threads.
If even after all these attempts, the machine skips stitch then there must have a timing issue in it. In this case, experts help is recommended.
Inconsistent bobbin tension
Isn’t it disgusting to keep adjusting the bobbin tension now and then? We know it is because we have already found many sewing machine users coming up with this issue with a disgusting face.
In case, you are also facing this problem, at first, check the bobbin thoroughly. If the bobbin is of plastic then replace it at once with a new metal made one.
The reason is- plastic made bobbins prone to wear after some days and so hardly fit to the bobbin case. As a result, the bobbin fails to maintain tension consistently.
Machine makes weird noises
The most common reason for the weird sounds that your machine produces is the irregular cleaning of it. So, whenever you hear something unexpected like clunks or thumps coming out of the machine, stop sewing at once.
Then, find out the manual and go through the maintenance section inch by inch. Clean the machine as per the instructions of the manual. Oil the machine and test its performance on a piece of scrap fabric.
If the sound doesn’t come out anymore then the machine is again ready to set to sewing. But, if the sounds don’t disappear, don’t use the machine any more rather consult an expert.
To sum up, getting failures in your sewing machine is very normal but letting those be unresolved for weeks or months is not. Even though you know you should call in a specialist yet suffer from cash deficiency, don’t hesitate to consider our list of how to fix a sewing machine primarily. We guarantee that you will not be dissatisfied a bit, rather take pride in yourself.