Although, at the present time, there are millions of sewing machines in the market. Yet very few of them is capable of being an alternative to the singer. Singer is one of those rare sewing machine brands that has been able to create an ever-lasting vibe among the fashionista because of its regular evolvement with the time. So it is a common question How to Set Up a Singer Sewing Machine.
There is no value of having such a marvelous sewing machine if you even don’t know how to set it up before the main use. Simply, the machine will be unable to serve you to the fullest. As the issue is so grave, so we have decided to help you learn the vivid process of setting up a singer sewing machine so that your next dealing with the machine turns to be ace!
Setting up a Singer Sewing Machine
The complete set up of a singer sewing machine requires you to do the following things: getting introduced to its parts, bobbin winding, inserting bobbin, needle threading, and stitch selection. Now, we will discuss each of these in details for you. Keep following us.
The parts of a singer sewing machine
Power switch: It is the on/off button of the machine that you can normally find on the right side of a singer machine.
Spool Pin: It is used to hold the thread spool and it is generally located at the above of the machine.
Bobbin binder spindle: This is the bobbin holder at the time of winding. This is located on the right brink above a machine.
Bobbin winding stopper: It stops the winding process when the bobbin is filled with thread. It is placed between the spool pin and the bobbin binder spindle.
Bobbin-winder thread guide: At the time of bobbin winding, this guide is used widely. The guide is located on the left above a singer machine.
Stitch length and width dials: There are used to control the length and width of the stitch respectively. The length dial is normally found on the front of the machine while the width dial is located just below the bobbin-winding stopper.
Reverses stitch lever: You can find this lever on the front of a singer sewing machine and use it to stitch reverse.
Dial for pattern selection: The dial is also located on the front of a machine just above the stitch length dial. You can use it to choose the perfect stitch.
Hand wheel: With this, you can lower and raise the needle. You can find it on the right side of a machine.
Thread tension dial: The dial is generally found just along and below the bobbin-winding thread guide that is used for controlling the tension of the top thread.
Presser foot: It helps you to keep holding a fabric securely.
To wind the bobbin, the following steps are to be followed:
- Ensure that the needle is moving no more by pushing in the indent placed on the disc of the hand wheel.
- Place the thread spool on the spool pin.
- Make sure that the thread is not going to tangle by sliding the spool pin cap/holder securely over the spool’s rim.
- Pass the thread via the thread guide’s lower slot and upper slot respectively.
- Wind the thread around the forepart of tension disc of the bobbin winder.
- Pass the end of the thread via the tiny hole of the bobbin’s rim. Remember to pass the end from inside.
- Keep holding the end of the thread and run the machine stepping on the speed controller.
- Run it until the bobbin is filled and the winding stops automatically.
- Cut the thread and get the bobbin released from the bobbin winding pin.
- Trim the thread ends from the bobbin’s top
- In the end, get back the bobbin winding indent of the hand wheel to its previous position simply pressing it.
Follow the steps carefully to insert the bobbin:
- At first, rotate the hand wheel to you so that the needle is raised to the highest position.
- Push the bobbin-release button to the right for removing the bobbin-cover plate. The cover will at once pop up so that you can remove it effortlessly.
- Now, insert the bobbin. Though this step appears to be the simplest yet it requires more alertness. You just cannot leave the bobbin insert rather you are to ensure that it rotates against the clock when the thread is pulled.
- Keep pulling the thread at first via the slot, then to the left.
- Next, place a finger quite mildly on the bobbin’s top and keep pulling the thread as long as it doesn’t stop in the slot.
- Drag out 15cm of thread to lead it to the rear of the machine below the presser foot.
- Lastly, it’s time to replace the cover plate of the bobbin to the needle plate.
All the modern Singer Sewing Machine includes an automatic needle threading facility, so here follow the instructions of using it perfectly.
- Firstly, rotate the hand wheel to you to place the needle to the highest position.
- Hook the thread just under the thread guide.
- Pull the needle threader down and pass the thread into the hook
- Release the threader for pulling a loop through the needle’s eye.
- Finally, pull the thread through the eye completely.
The singer sewing machines include around 30 different stitches on an average for your convenience. Among these, you can select any one that seems to be perfect for your type of sewing.
To select your stitch, at first, go through the stitch chart printed on the front and recognize the number of your stitch. Rotate the dial pattern to lock the number. Again, some machines include LCD display and buttons for stitch selection where the process is easier. In that type of machine, just keep eye on the screen and use the button to call your stitch number; when it comes and shown on the display simply lock it.
This is how a singer sewing machine is set up. We humbly request you to learn each of the steps of each category so well that you yourself become a master shortly. Otherwise, being a pride owner of such a fabulous sewing machine may not render any benefit for you, which will make the purpose of you and the manufacturer simply meaningless.