Blunt and rusty pins are not only difficult to pierce but also leave residue on your fabric, eventually ruining the quality. This is why using sharp pins while sewing or displaying is a must. Putting much emphasis on the sharpness of pins, today we introduce you to how to sharpen sewing pins in a variety of ways.
Here we go!
How to sharpen sewing pins with an emery board?
An emery board is an item that you might have available in your collection. In fact, it usually is available to almost all the houses.
Can’t get what it is? Well, an emery board actually refers to a surface that is kept uneven intentionally. For example, the uneven surface of your nail cutter or a knife. It can even be that manicure or pedicure tool, which one you use to rub against the nails.
Once you have the board, we mean such a surface; rub your pins one by one against it. The coarse and uneven surface will remove all sorts of rusts and sediment from the pin. Eventually, it will be sharp as before.
How to sharpen sewing pins with an emery strawberry or tomato?
An emery strawberry or tomato or anything else is basically a tiny bag that is stuffed with emery sand. The cover with which the sand is covered has great resilience, thereby provides a tight grip for your pins.
However, to use the sand-filled bag to sharpen your rusty or blunt pins, what you need to do is very simple. Pierce the bag with the pin as much as possible. Take out the pin and pierce again. Keep repeating the process as long as you don’t find the pin to be sharp as per your expectation.
How to sharpen sewing pins with sandpaper?
Instead of an emery board or cushion, you may go for sandpaper that is cheap and commonly available. But, with sandpaper, you must be a bit cautious if you don’t want to get your pins eroded untimely.
First of all, while making the purchase of the paper, be sure that the paper has a fine grit, not a harsh one. Remember that you will be sharpening a pin-like tiny and weak stuff, not a sturdy knife or anything else.
In addition, you must have control while rubbing the pin against the coarse surface of the sandpaper. Don’t keep rubbing for a minute rather than for a couple of seconds. Again, don’t rub with the ultimate strength rather with a mild force.
How to sharpen sewing pins with a pincushion of steel wool?
Steel wool, unlike the natural wool that we normally use for winter clothes, is harsh with rough edges. These uneven edges are the things that take the lead role in sharpening your pins.
So, a pincushion of steel wool is obviously stuffed with steel wool into which you need to pierce your pins. Pierce, take out; again pierce, take out. Repeat until the pins are smooth and ready to pierce your fabric without leaving stains.
How to sharpen sewing pins with any lubricant and foil paper?
As our subheading says, you can have any lubricant e.g. soybean, mustard or coconut or anything else. Then, have a tiny piece of foil paper that you can get inside a pack of cigarette.
Once you have the right ingredients, it’s time to jump to the main part.
First of all, dip a piece of rusty pin into the lubricant, hold for 10 seconds before pulling it out. As soon as you pull the pin out, rub it with the foil paper. Finally, clean the pin with a tiny rag.
The reaction of the rust and oil cleans the pin and the rubbing against the foil paper further polishes it.
How to sharpen sewing pins with a piece of soap bar?
If you are in a hurry and haven’t much time to adopt any of the above-mentioned methods then this hack is for you. It brings an instant solution for you yet the outcome might not be as permanent as the other ones.
So, this method requires you to have a piece of soap bar or just a tiny piece of it. Place the bar on a surface or simply grab it with your hands (if it’s a tiny piece).
Just like before, pierce the pins and pull out. This won’t only clean your pins but also give them a slippery surface. Because of the surface, your penetration of a pin through layers of fabrics will be far easier.
With the combination of the right tools, you can make your own emery strawberry or tomato and pincushion of steel wool. This will help you save a good amount on the purchasing of any of these.
The first and the foremost step for making two of the tools is to make a pincushion. Once the cushion is made, what you need to do is to fill it with the required stuff.
Can I sharpen my needle with the methods of pin sharpening?
Ans. Yes, you can obviously. In fact, the methods of sharpening a pin and a needle are the same.
Is it possible to make a pincushion by myself?
Ans. Making a homemade pincushion is super easy with a few basic hand sewing tools – needle, thread and a piece of rag.
Do crushed walnut shells sharpen pins?
Ans. To be straightforward, the shells are great stuff to sharpen your pins
To sum up, sharp sewing pins don’t only save your time and effort but also help you retain the quality. Therefore, it is advisable to sharpen your pins after a certain period of time. Doing this will boost both their performance and longevity.